In order to swiftly replace the tiles in your bathroom shower, here are some measures you can follow:
Cleaning the region: To clean the area around the damaged tiles, use a mixture of warm water and gentle dish soap to scrub the surface. Make sure that any dirt or debris that may have become embedded in the grout or tiles is removed.
Remove the tiles that are damaged Make use of a hammer and a chisel to remove the tiles that are damaged in a careful manner. Be sure to cover your eyes with safety glasses and gloves, and take your time while working so as not to damage the tiles around you.
Repeat the cleaning process: After the damaged tiles have been removed, scrub the area once more to get rid of any debris or dust that may have accumulated.
To instal new tiles, first measure and cut them so that they will fit the area, and then spread a very thin layer of glue on the back of each tile. The tiles should be pressed into place, and then a rubber mallet should be used to tap them into position.
To grout the tiles, once the adhesive has been allowed to fully dry, you will need to mix up a batch of grout in accordance with the instructions provided by the manufacturer. When applying the grout to the joints between the tiles, use a grout float. After the grout has been applied, use a damp sponge to smooth it out and remove any excess.
Wait for the grout to dry: Wait for the grout to dry in accordance with the guidelines provided by the manufacturer. After the grout has had enough time to dry, polish the tiles with a sponge or a gentle cloth.
You can rapidly replace broken tiles in the bathroom shower by following these procedures, which will also help you restore the aesthetic of your shower.